Rechercher
Français

Transformer protection temperature relay TR440

Fabricant:

Ziehl

Numéro de pièce du fabricant:

T224184
Délai de livraison: 2 Weeks

Pt100 Temperature-Relay, protection of transformers, 4 Sensors Pt100, 4 Limits, Monitoring of core, fan control, Panel mount

464 CAD
+ -
Spécifications des produits
Brand ZIEHL
Country of origin Germany
Rated supply voltage AC/DC 24 – 240 V, 0/50/60 Hz, <2 W < 4 VA
Tolerance DC DC 20,4 - 297 V
Tolerance AC AC 20 - 264 V
Sensor current ≤ 0.7 mA
Sensor Pt 100 according to EN 60751 (2/3-wire version)
Switching capacity max. 2,4 W or 2,4 VA (ohmic Load)
Switching voltage max. AC 415 V
Switching current max. 5 A
Fuse(A) T3.15
Ambient temperature range -40 °C ... +65 °C
Protection terminals IP 20
Protection housing front-side IP 54, back-side IP 20
Nominal operational current Ie AC15 Ie = 1 A ..... Ue = 400 V Ie = 2 A ..... Ue = 250 V
Rated impulse voltage(V) 4000
Applied standards UL/CSA

Temperature relay to protect transformers against excess temperature and to control a fan.
The temperatures in the windings are monitored with three Pt 100 sensors. The core temperature can be monitored with a fourth sensor.
The 4 alarms/output relays are used to control the fan, to signal an advance warning and to switch-off the transformer. Various programs facilitate using the alarm ideally for each application. Depending on the program, e.g. an extra relay is available for the fault message or for triggering due to exceeding the maximum core temperature.

Other uses

Alternatively, with the fourth sensor the temperature of the room the transformer is located in can be monitored and, with the alarm, the room ventilation can be controlled. The device can also be used for other tasks for temperature monitoring
e.g., for motors.

Overview of the functions

  • 4 Sensor inputs Pt 100 (RTD), 2 or 3-wire connection
  • Large monitoring range -199…+850°C / -199...+999°F
  • 4 Alarms / Relays
  • 3-digit digital display (resolution 1°C / 1°F)
  • 4 LEDs sensor
  • 4 LEDs relay
  • 4 LEDs alarm
  • 1 LED error
  • Control voltage AC/DC 24-240 V
  • Clear displays and simple programming
  • Min and max sensor values can be saved
  • Code lock against unintended / unauthorised changes to the settings
  • Optional RS 485 interface with Modbus RTU protocol
  • EasySimulation for simple sensor value simulation
Entrez votre propre avis fermer
  • Un produit ne peut être commenté qu'après avoir été acheté
  • Seuls les utilisateurs enregistrés peuvent saisir des avis
  • Mauvais
  • Excellent
Description

Temperature relay to protect transformers against excess temperature and to control a fan.
The temperatures in the windings are monitored with three Pt 100 sensors. The core temperature can be monitored with a fourth sensor.
The 4 alarms/output relays are used to control the fan, to signal an advance warning and to switch-off the transformer. Various programs facilitate using the alarm ideally for each application. Depending on the program, e.g. an extra relay is available for the fault message or for triggering due to exceeding the maximum core temperature.

Other uses

Alternatively, with the fourth sensor the temperature of the room the transformer is located in can be monitored and, with the alarm, the room ventilation can be controlled. The device can also be used for other tasks for temperature monitoring
e.g., for motors.

Overview of the functions

  • 4 Sensor inputs Pt 100 (RTD), 2 or 3-wire connection
  • Large monitoring range -199…+850°C / -199...+999°F
  • 4 Alarms / Relays
  • 3-digit digital display (resolution 1°C / 1°F)
  • 4 LEDs sensor
  • 4 LEDs relay
  • 4 LEDs alarm
  • 1 LED error
  • Control voltage AC/DC 24-240 V
  • Clear displays and simple programming
  • Min and max sensor values can be saved
  • Code lock against unintended / unauthorised changes to the settings
  • Optional RS 485 interface with Modbus RTU protocol
  • EasySimulation for simple sensor value simulation
Spécifications des produits
Brand ZIEHL
Country of origin Germany
Rated supply voltage AC/DC 24 – 240 V, 0/50/60 Hz, <2 W < 4 VA
Tolerance DC DC 20,4 - 297 V
Tolerance AC AC 20 - 264 V
Sensor current ≤ 0.7 mA
Sensor Pt 100 according to EN 60751 (2/3-wire version)
Switching capacity max. 2,4 W or 2,4 VA (ohmic Load)
Switching voltage max. AC 415 V
Switching current max. 5 A
Fuse(A) T3.15
Ambient temperature range -40 °C ... +65 °C
Protection terminals IP 20
Protection housing front-side IP 54, back-side IP 20
Nominal operational current Ie AC15 Ie = 1 A ..... Ue = 400 V Ie = 2 A ..... Ue = 250 V
Rated impulse voltage(V) 4000
Applied standards UL/CSA
Tags des produits