Rechercher
Français

Safety temperature limiter Type STR100| 200...500°C

Fabricant:

Ziehl

Numéro de pièce du fabricant:

T224062
Délai de livraison: 2 Weeks

Safety Temperature Limiter for Pt100, SIL 2 according to IEC 61508

418 CAD
+ -
Spécifications des produits
Brand ZIEHL
Country of origin Germany
Rated supply voltage DC 24V
Switching voltage max. AC 440 V
Conventionel thermal current Ith 6 A
Fuse(A) gG/gL 6 A
Rated impulse voltage(V) 4000
Rated insulation voltage Ui(V) 250
Measuring range 0…45.0°
Frequency Range(Hz) 50/ 60 Hz
Power consumption < 2 W
Terminal voltage < 15 V open terminals < 2 V with Pt 100 and highest temperature
Terminal current < 3.15 mA
Switching current max(A) 6
Switching voltage max(V) 400
Switching power max(W) 2000
Protection housing IP 30
Protection terminals IP 20
Applied standards UL/CSA

The Safety Temperature Limiter type STR 100 is an electronic thermostat monitoring the temperature of heating equipment and machinery. When the permitted temperature-limit is exceeded or in case of a malfunction, the STR 100 switches off without delay. An active reset must be made for a restart. The temperature limit is adjustable with a scaled potentiometer. An unintended or unauthorized adjusting of the limit is prevented through a lead-sealed transparent cover.

With supply voltage switched on, the STR 100 operates in a changeable lockout mode and the relay must be started by a reset (manually with built-in reset button or external reset) to make contact (no) close. Applicable for plants with supervised operation. The mode of operation corresponds to type 2BJK according EN 60730/VDE 0631.

The temperature is measured with a Pt 100 resistance temperature detector (RTD) according to EN 60751 / IEC 751. The process qualification in combination with the sensor must be proved. To fulfil affords for higher safety functionality the function has to be routine-tested periodically. The thermostat series STR 100 meets safety category 3 (Safety of machines EN 954-1, TÜV Rheinland documents T 24/00 + T103 2007 Z1 + T103 2007 E2). If safety approval is recommended only use listed RTD.

Temperature Limiter
A temperature-limiter is an equipment that switches of permanently (locked) after the limit has been exceeded. A reset (manually or with a tool) is possible after the temperature has fallen below switch-back point (limit minus hysteresis).

Safety Temperature Limiter
A safety temperature limiter is a limiter that fulfils in addition the requirements of extended safety according to DIN 3440.

Entrez votre propre avis fermer
  • Un produit ne peut être commenté qu'après avoir été acheté
  • Seuls les utilisateurs enregistrés peuvent saisir des avis
  • Mauvais
  • Excellent
Description

The Safety Temperature Limiter type STR 100 is an electronic thermostat monitoring the temperature of heating equipment and machinery. When the permitted temperature-limit is exceeded or in case of a malfunction, the STR 100 switches off without delay. An active reset must be made for a restart. The temperature limit is adjustable with a scaled potentiometer. An unintended or unauthorized adjusting of the limit is prevented through a lead-sealed transparent cover.

With supply voltage switched on, the STR 100 operates in a changeable lockout mode and the relay must be started by a reset (manually with built-in reset button or external reset) to make contact (no) close. Applicable for plants with supervised operation. The mode of operation corresponds to type 2BJK according EN 60730/VDE 0631.

The temperature is measured with a Pt 100 resistance temperature detector (RTD) according to EN 60751 / IEC 751. The process qualification in combination with the sensor must be proved. To fulfil affords for higher safety functionality the function has to be routine-tested periodically. The thermostat series STR 100 meets safety category 3 (Safety of machines EN 954-1, TÜV Rheinland documents T 24/00 + T103 2007 Z1 + T103 2007 E2). If safety approval is recommended only use listed RTD.

Temperature Limiter
A temperature-limiter is an equipment that switches of permanently (locked) after the limit has been exceeded. A reset (manually or with a tool) is possible after the temperature has fallen below switch-back point (limit minus hysteresis).

Safety Temperature Limiter
A safety temperature limiter is a limiter that fulfils in addition the requirements of extended safety according to DIN 3440.

Spécifications des produits
Brand ZIEHL
Country of origin Germany
Rated supply voltage DC 24V
Switching voltage max. AC 440 V
Conventionel thermal current Ith 6 A
Fuse(A) gG/gL 6 A
Rated impulse voltage(V) 4000
Rated insulation voltage Ui(V) 250
Measuring range 0…45.0°
Frequency Range(Hz) 50/ 60 Hz
Power consumption < 2 W
Terminal voltage < 15 V open terminals < 2 V with Pt 100 and highest temperature
Terminal current < 3.15 mA
Switching current max(A) 6
Switching voltage max(V) 400
Switching power max(W) 2000
Protection housing IP 30
Protection terminals IP 20
Applied standards UL/CSA
Tags des produits