Rechercher
Français

PTC-Thermistor-Relay Type MSR220VA AC/DC 24V

Fabricant:

Ziehl

Numéro de pièce du fabricant:

T222431
Délai de livraison: 2 Weeks

PTC-resistor relay, single PTC-circuit, ATEX-Approval 2014/34/EU, with RESET

71 CAD
+ -
Spécifications des produits
Brand ZIEHL
Country of origin Germany
Protection housing IP 30
Protection terminals IP 20
Switching point < 4000 Ω
Ambient temperature range -20...+55 °C
Frequency Range(Hz) 45 - 65 Hz
Power consumption <2 mW
Cut-out-point .3 kΩ…3.65 kΩ…3.85 kΩ
Reclosing point 1.7 kΩ…1.8 kΩ …1.95 kΩ
response tolerance +/- 6° C
Collective resistance cold thermistor ≤1,65 kΩ
Terminal voltage ≤ 2.5 V at R ≤ 3.65 kΩ ≤ 9 V at R = ∞
Terminal current <1 mA
Short circuit 20 Ω ≤ R ≤ 40 Ω
Switching voltage max(V) 415
Switching current max(A) 5
Switching power max(W) 120
Transformer EN 61558-2-6
Fuse(A) 4

Ziehl PTC thermistor relays protect motors, transformers, machines and equipment against thermal overload. These are according to DIN EN 60947-8 and are thus exchangeable. Used in conjunction with respective PTC thermistors they provide a reliable temperature protection in the temperature range 60 °C up to 180 °C.

PTC-thermistors according DIN 44081 and DIN 44082 shall be connected. PTC thermistors are suitable for the installation into windings of electrical machines, bearings and transformers as well as to monitor the temperature of liquid media, airflow and gases. With ATEX approval, explosion-protected equipment in explosive gas atmospheres (marking G: gas) or in areas with combustible dust (marking D: dust) can be protected.

Entrez votre propre avis fermer
  • Un produit ne peut être commenté qu'après avoir été acheté
  • Seuls les utilisateurs enregistrés peuvent saisir des avis
  • Mauvais
  • Excellent
Description

Ziehl PTC thermistor relays protect motors, transformers, machines and equipment against thermal overload. These are according to DIN EN 60947-8 and are thus exchangeable. Used in conjunction with respective PTC thermistors they provide a reliable temperature protection in the temperature range 60 °C up to 180 °C.

PTC-thermistors according DIN 44081 and DIN 44082 shall be connected. PTC thermistors are suitable for the installation into windings of electrical machines, bearings and transformers as well as to monitor the temperature of liquid media, airflow and gases. With ATEX approval, explosion-protected equipment in explosive gas atmospheres (marking G: gas) or in areas with combustible dust (marking D: dust) can be protected.

Spécifications des produits
Brand ZIEHL
Country of origin Germany
Protection housing IP 30
Protection terminals IP 20
Switching point < 4000 Ω
Ambient temperature range -20...+55 °C
Frequency Range(Hz) 45 - 65 Hz
Power consumption <2 mW
Cut-out-point .3 kΩ…3.65 kΩ…3.85 kΩ
Reclosing point 1.7 kΩ…1.8 kΩ …1.95 kΩ
response tolerance +/- 6° C
Collective resistance cold thermistor ≤1,65 kΩ
Terminal voltage ≤ 2.5 V at R ≤ 3.65 kΩ ≤ 9 V at R = ∞
Terminal current <1 mA
Short circuit 20 Ω ≤ R ≤ 40 Ω
Switching voltage max(V) 415
Switching current max(A) 5
Switching power max(W) 120
Transformer EN 61558-2-6
Fuse(A) 4
Tags des produits