Rechercher
Français

Level Monitors Type NS43

Fabricant:

Ziehl

Numéro de pièce du fabricant:

V223267
Délai de livraison: 2 Weeks

Level Monitor, 4 Limits, MIN / MAX-Control, protection against overflow and running dry, Housing Design K for switchgear cabinet

168 CAD
+ -
Spécifications des produits
Brand ZIEHL
Country of origin Germany
Rated supply voltage AC/DC 24 – 240 V 0/50/60 Hz < 3 W < 5 VA
Tolerance AC AC 20 - 264 V
Tolerance DC DC 20 - 297 V
Frequency Range(Hz) 0,45-62 Hz
Ambient temperature range -20...+60 °C
Protection housing IP 30
Protection terminals IP 20
Applied standards UL/CSA

The level monitor NS43 regulates the level of liquid in a container between 2 electrodes. In the normal operation the level of the liquid is situated between the electrodes E2 and E3. The relay K2 tightens, if the level E3 is achieved and drops, if E2 is fallen below. Over the output contacts (1 change-over switch) a pump or a valve can be controlled depending upon case of application and so the level be regulated.

If the level continues to rise in an incident and if the electrode achieves E4, then a message takes place via relay K3 (drops). In the reverse case (level under E1) the relay K1 drops and protects e.g. a pump against running dry. LEDS signal, which electrodes are moistened.

  • Level monitoring of leading liquids
  • MIN/MAX level regulation
  • protection from overflow
  • protection from running dry
  • sensitivity adjustable 5...250 kΩ
  • LED for level display / alarm

Application

In the galvanotechnics and everywhere, where the level of a leading liquid must be held on a certain level and at the same time a monitoring on overflow and/or no-load operation is necessary.

Entrez votre propre avis fermer
  • Un produit ne peut être commenté qu'après avoir été acheté
  • Seuls les utilisateurs enregistrés peuvent saisir des avis
  • Mauvais
  • Excellent
Description

The level monitor NS43 regulates the level of liquid in a container between 2 electrodes. In the normal operation the level of the liquid is situated between the electrodes E2 and E3. The relay K2 tightens, if the level E3 is achieved and drops, if E2 is fallen below. Over the output contacts (1 change-over switch) a pump or a valve can be controlled depending upon case of application and so the level be regulated.

If the level continues to rise in an incident and if the electrode achieves E4, then a message takes place via relay K3 (drops). In the reverse case (level under E1) the relay K1 drops and protects e.g. a pump against running dry. LEDS signal, which electrodes are moistened.

  • Level monitoring of leading liquids
  • MIN/MAX level regulation
  • protection from overflow
  • protection from running dry
  • sensitivity adjustable 5...250 kΩ
  • LED for level display / alarm

Application

In the galvanotechnics and everywhere, where the level of a leading liquid must be held on a certain level and at the same time a monitoring on overflow and/or no-load operation is necessary.

Spécifications des produits
Brand ZIEHL
Country of origin Germany
Rated supply voltage AC/DC 24 – 240 V 0/50/60 Hz < 3 W < 5 VA
Tolerance AC AC 20 - 264 V
Tolerance DC DC 20 - 297 V
Frequency Range(Hz) 0,45-62 Hz
Ambient temperature range -20...+60 °C
Protection housing IP 30
Protection terminals IP 20
Applied standards UL/CSA
Tags des produits