• Brand
• ZIEHL

• Protection rating
• IP 67

• Contact service life, electr. cos φ=1
• 10^5 operations at 300 V / 9 A
• 5 x 105 operating cycles at AC 250 V / 3 A

• Conventionel thermal current Ith
• 6 A
• max. 5 A
• max. 9 A

• current consumption
• max. 12 mA + max. 20 mA per output

• Delay K2 - K1
• app. 100 ms

• Delay phase-loss (<60% Us)
• < 0,2 s

• Delay undervoltage/asymmetry
• adjustable 0,1...10 s

• Limit asymmetry
• adjustable 5...25 %

• Limit undervoltage
• adjustable 70...95 %

• Measurement of voltage (RMS)
• L1 / L2 / L3 towardsN

• Nominal currents / resolution
• 0.2...10 A
• AC 1/5 A / 1 mA

• Output relays
• 2 change-over contacts (co), ca. 3 VA
• 2 x 2 NO-contacts

• Overload capacity
• 10 A continuously, 15 A max. 3 s
• 100 A / 300 A
• 500 A
• 60 mV: 10 V, 1A: 2 A, 5A: 7,5 A, 10 A: 11 A
• 8 A continously, 25 A max. 1 s

• Pick-up delay after recovery of Us
• < 0,5 s

• Protection housing/terminals
• IP 30 / IP20
• IP 54/ IP 20

• Rated operational current
• AC-15 Ie = 6 A Ue = 250 V
• AC15.......Ie = 2 A .... Ue = 250 V DC13.......Ie = 2 A .... Ue = 24 V Ie = 0.2 A .... Ue = 125 V Ie = 0.1 A .... Ue = 250 V

• Rated supply voltage
• AC 110-120 V
• AC 220-240V
• AC 230 V
• AC 380-415 V
• AC 400V
• AC/DC 24 V
• AC690 V
• 3 AC 400 V, 50/60 Hz < 3 VA
• 3-phase 380-415 V, without neutral
• 3-phase, 400 V without N
• AC 110-120 V AC 220-240 V
• AC 220 - 240 V ± 10 % 50/60 Hz ≤ 2 VA
• AC 220 - 240 V ±10 %, 50/60 Hz, 3VA
• AC 220 - 240 V, ± 10%, 50/ 60 Hz, < 3 VA
• AC 230 V ± 10 %, 50/60 Hz ≤ 2 VA
• AC 230 V, +10%/-15%, 3VA, 50 Hz
• AC 230 V, +10...-30%, < 5 VA
• AC/ DC 24V - 240V, < 1,5W, < 5 VA
• AC/DC 24 – 240 V 0/50/60 Hz < 3 W < 5 VA
• AC/DC 24 - 240 V, < 3 W, < 5 VA, (AC 20 - 264 V, DC 20,4 - 297 V)
• AC/DC 24 - 240 V, 0/50/60 Hz, < 2 W, < 3 VA
• AC/DC 24 - 240 V, 0/50/60 Hz, < 4 W, < 8 VA DC: 20,4 ... 297 V, AC: 20 ... 264 V < 2 W, < 6 VA
• AC/DC 24 – 240 V, 0/50/60 Hz, <2 W < 4 VA
• AC/DC 24 - 240 V, AC 19 - 264 V, DC 20 - 297 V, ≤ 2 VA
• AC/DC 24 - 240 V, AC 20 - 264 V, DC 20 - 297 V, < 1 W , < 4 VA
• AC/DC 24 - 240 V, AC 20 - 264 V, DC 21- 297 V, < 2 VA
• AC/DC 24 V, ± 15 %, < 3 VA
• AC/DC 24 V, AC ± 10 % DC 21- 30 V < 2 VA
• AC/DC 24...240 V, AC 19-264 V, DC 20-297 V < 2VA
• AC/DC 24-240 V
• AC/DC 24-240 V 0/50/60 Hz + 25/-20 %, <1W,<3VA
• AC/DC 24-240 V, <3W, <10VA (AC 20-264 V, DC 20,4-297 V)
• AC/DC 24-240 V, 0/45...65 Hz, < 5 VA
• AC/DC 24-240V, <3W, <6VA
• AC/DC 24-270 V, 0/40...70 Hz, <1,8W / <6,5 VA
• AC/DC 24-270 V, 0/40...70 Hz, <5VA
• AC/DC 24-270 V, 0/45...65 Hz, <5VA
• AC/DC 24-270 V, 0/50/60 Hz, <4.5 W, < 12 VA
• AC/DC 90 - 240 V, AC 80 - 264 V, DC 80 - 297 V, < 2 VA
• AC230 V
• DC 10 ... 30 V, max. 22 mA, typ . <13 mA
• DC 10-30 V
• DC 20 - 30 V, < 2 VA
• DC 24 V, 10,0 ... 30,0 V, <0,25 W
• DC 24 V, SELV, PELV
• DC 24V
• DC 9...30 V (2-wire), alterable with bridge
• DC/AC 24 – 270 V 0/40...70 Hz, <3 W, <9 VA

• Switching power max cos φ=1
• 1500 VA
• 2000 VA
• 5 A 250 V

• Voltage phase-N
• AC 40,0 … 330,0 V, 50/60 Hz

• Ambient temperature range
• 0...55°C
• -10...+40 °C
• -20 °C ... +65 °C
• -20...+55 °C
• -20...+60 °C
• -20...+70 °C
• -20...+85 °C
• -32°C...+70°C
• -40 °C ... +55 °C
• -40 °C ... +65 °C
• -5 °C … +70 °C

• Applied standards
• EN 61869-1, EN 61869-2 and IEC 61010-1
• UL/CSA

• Attachment
• on 35 mm DIN rail according to EN 60 715 or screws M4

• External wiring temperature range
• -5 °C … +70 °C

• Monitoring range
• 0...15 A
• AC 0 ... 20 A

• Operating temperature (°C)
• -20 ~55

• Power consumption
• < 0,5 W
• < 12 VA
• < 2 W
• < 2,5 W
• < 3 VA
• < 3 W
• < 3 W ..... < 7 VA
• < 3,5 W
• < 4 W, < 13 VA
• 0,5 W, < 1,2 VA
• app. 3 VA

• Storage temperature(°C)
• -20 ~ 70

• Switching current
• max. 5 A

• Switching power
• max. 1250 VA (resistive load), max. 120 W at DC 24 V

• Switching voltage
• max. AC 300 V, DC 300 V
• max. AC 415 V
• max. AC 440 V

• Tolerance AC
• +10 % ... -20 %
• +20%...-30%
• 20,4...264 V
• 20.4...297 V
• AC 20 - 264 V

• Tolerance DC
• 20 - 30 V
• DC 20 - 297 V
• DC 20,4 - 297 V

• UL electrical ratings
• 250 V ac, 5 A, resistive

• Adjustment time
• <0.5 s

• Adm. Tolerance Us
• +10%…-15%
• ±20%

• Analog output
• 0/4-20 mA, max. 500 Ω, 0-10 V, max. 10 mA
• DC 0...20 mA
• DC 4...20 mA (max. 32 mA)

• Class B, DIN 43 760
• Δϑ = ± (0,3 + 0,005 ϑ) [°C]

• Collective resistance cold thermistor
• ≤1,65 kΩ

• Connectable PTC resistors
• 1...6 PTC according DIN VDE V 0898-1-401 (formerly DIN 44081/82)

• Current INx
• > 3 mA

• Current output
• 40 mA
• AC 350 mA

• Cut-out-point
• .3 kΩ…3.65 kΩ…3.85 kΩ

• Error of setting
• ± 5 K

• Ethernet-Interface( MBit/s)
• 10

• Fuse(A)
• 4
• gG/gL 6 A
• T3.15

• Input
• 0...250 mbar (0...250 cm water; 0...~290 cm oil)

• Input current(mA)
• AC 0 ... 60 A, sinus shaped (RMS)

• input type
• 1 - 3 x Pt 100 DIN 43 760/IEC 751 without compensation of line resistance

• internal resistance
• 60 mV: 40 kΩ, 1A: 0,1 Ω, 5A: 20 mΩ, 10 A: 10 mΩ

• material
• steel

• Max. operational voltage
• 25 VDC

• max. response time
• 200 ms

• Max. switching distance
• 4 mm (recomm. ≤3 mm)

• Max.switching frequency
• 800Hz

• Measuring inputs
• 12 x Pt 100 acc. to EN 60 751 / IEC 60 751

• Measuring range
• 0,003 A ... 9,999 A
• 0...90,0°
• 0…45.0°
• -199,9...+800 °C
• -199°...850°C
• 2,0...20,0 °
• AC 0...20 / 0...100 A

• Measuring signals
• DC 0/4 ... 20 mA, 20 Ω DC 0...10 V, 63 kΩ

• Measuring time sensor
• 0,25...3s

• Measuring voltage at NAT+15K -20...NAT+5K
• ≤ 7,5 V DC ≤ 2,5 V DC

• Measuring voltage phase - N
• AC 10...310 V
• AC 15.0…480 V
• AC 40...300 V

• Measuring voltage phase - phase
• AC 15...530 V
• AC 26.0…830 V
• AC 40...520 V

• Nominal current Idyn​
• 6 kA / 40 ms

• Nominal operational current Ie AC15
• Ie = 1 A ..... Ue = 400 V Ie = 2 A ..... Ue = 250 V
• Ie = 3 A Ue = 250 V

• Nominal operational current Ie DC13
• DC-13 Ie = 2 A Ue = 24 V ..... DC-13 Ie = 0.4 A Ue = 120 V DC-13 Ie = 0.2 A Ue = 250 V
• Ie = 2 A ..... Ue = 24 V Ie = 0,2A ..... Ue = 125 V Ie = 0,1A ..... Ue = 250 V

• Nominal resistance
• 100 Ω at 0 °C

• Nominal resistance R at -20...NAT-20K VPTC ≤ 2,5 V
• ≤ 250 Ω
• ≤ 750 Ω

• Nominal response temperature NAT (TNF)
• 60...120°C
• 60...180°C

• Nominal voltage(KV)
• 0,8

• output
• 4...20 mA, 2-wire

• Output current(A)
• ≤ 20 mA

• Output Type
• 3 x co

• Output voltage +U
• DC 15…35 V

• Protection housing
• front-side IP 54, back-side IP 20
• IP 20
• IP 30
• IP 40
• IP 54
• IP 64

• Protection terminals
• IP 20

• Pt 100 Sensor (RTD)
• EN 60715 / IEC 60751

• Rated continuous residual current(A)
• 40

• Rated current Kn primary/secondary
• 10 A / 0,0167 A

• Rated impulse voltage(V)
• 4000
• 6000
• 8000

• Rated insulation voltage Ueff
• 690 V

• Rated insulation voltage Ui(V)
• 250
• 300
• 690

• Rated power
• 50 mVA (180 Ohm)

• Rated short-time thermal current Ith​
• 2,4 kA / 1 s

• Reclosing point
• 1.7 kΩ…1.8 kΩ …1.95 kΩ

• Resolution
• 1 mA
• 1°C

• Response time
• 50 ms

• response tolerance
• +/- 6° C

• Sensor
• Pt 100 according to EN 60751 (2/3-wire version)

• Sensor current
• ≤ 0,8 mA
• ≤ 0.7 mA
• ≤0,6 mA
• ≤1 mA

• Short circuit
• 20 Ω ≤ R ≤ 40 Ω

• Supply Voltage Us
• AC 230 V

• Switching capacity
• max. 1250 VA (ohmic load) max. 48 W at DC 24 V
• max. 2,4 W or 2,4 VA (ohmic Load)

• Switching current max(A)
• 0.5
• 5
• 6

• Switching point
• < 4000 Ω
• 3,3 kΩ...4 kΩ typical 3,65 kΩ
• adjustable 0...100%
• adjustable, AC 0,5...5 A
• adjustable10...100% IN

• Switching power max(W)
• 120
• 2000
• 48

• Switching voltage max(V)
• 24
• 250
• 30
• 300
• 400
• 415

• Temperature coefficient
• 0,025 %/°K
• 3,85 x 10–3/K

• Temperature factor
• < 0.1 %/K

• Temperature-dependence
• ≤ 0,05 %/K

• Terminal current
• <1 mA

• Terminal voltage
• < 15 V open terminals < 2 V with Pt 100 and highest temperature
• ≤ 2.5 V at R ≤ 3.65 kΩ ≤ 9 V at R = ∞

• Test voltage Ueff
• 2500 V AC

• Thermal response-time ta
• ≤ 5 s

• Tolerance NAT
• ± 5 K

• Torque(NM)
• 10

• Transformer
• EN 61558-2-6

• Voltage loop
• DC 12...32 V

• Voltage output
• DC 40 V

• Frequency Range(Hz)
• 0 / 40 ... 400
• 0,45-62
• 10 ... 400
• 10.00 - 500.00
• 30 ... 400
• 30...70
• 40...70
• 42 … 3000
• 45 - 65
• 50 ...500
• 50/ 50...400
• 50/ 60

• Cable Length
• 200cm
• max. 1000 m at 19200 baud
• max. 20 m with CAT 5 patch cable

• Digital Input
• app. DC 18 V / 3,5 mA