• Brand
• Idec
• ZIEHL

• Country of origin
• Germany

• Rated supply voltage
• AC 24-240 V
• DC 24-240 V
• AC/DC 24 – 240 V 0/50/60 Hz < 3 W < 5 VA
• AC/DC 24 – 240 V 0/50…400 Hz < 3 W < 8 VA
• AC/DC 24-240 V

• AC-Meter
• 150 mV / 900 Ω / max. 2,5 V

• Ambient temperature range
• 0…50°C
• -20 °C ... +50 °C

• DC voltage and current
• ± 0,1 % ± 1 Digit

• Measuring time AC/DC
• DC:< 300 ms x Ø||AC:< 700 ms + 300 ms x Ø
• Measuring time AC/DC < 400 ms + delay of display ddi5

• Power consumption
• < 3 VA
• < 3 W
• < 3 W, < 10 VA

• Resolution Error
• +9999 / -1999

• Tolerance AC
• AC 19 - 264 V, Frequenz 20 - 120 Hz
• AC 20 - 264 V

• Tolerance DC
• DC 20 - 297 V
• DC 20,4 - 297 V

• AC voltage and current
• ± 0,5 % ± 1 Digit

• AC-measuring
• 300 mV / 20 kΩ / max. 2,5 V

• Current output
• DC 0/4 – 20 mA

• DC-measuring
• ± 300 mV / 29 kΩ / max. ±2,5 V

• DC-Meter
• ± 300 mV / 120 kΩ / max. ±2,5 V

• Error
• 0,3 % of current x (250Ω - load) / 250Ω

• Error AC
• ± 0,5 % ± 1 Digit ± 0,05 % K

• Error DC
• ± 0,1 % ± 1 Digit ± 0,02 % K

• Error Pt 100
• ± 0,2 % ± 0,5 K ± 0,04 °C/K

• Error resistance
• 500 Ω: 0,2 % ± 0,5 Ω 30 kΩ: 0,5 % ±2 Ω

• Fuse(A)
• 2

• Input current(mA)
• AC/DC 1A, 5A, max. 7,5A/4s, 25A/1s, 30 mΩ
• DC 0/ 4 - 20 mA

• Input Voltage
• AC/DC 0-30/150/300/600 V, 80-120 V, Ri = 500 kΩ, max. 600 V, max. 300 V to GND
• DC 0 - 10 V
• DC 12~24V

• load resistance (current) Ω
• > 1000
• ≤ 500

• Measuring category
• CAT II 600 V DOUBLE INSULATION CAT III 300 V DOUBLE INSULATION

• Measuring range
• -200 °C .. 800 °C

• Output current(A)
• DC 0/4-20 mA, load max. 500 Ω

• Protection housing
• Front-side IP 50, back-side IP 20
• front-side IP 54, back-side IP 20
• IP 30
• IP 40

• Protection terminals
• IP 20

• Pt 100- Meter
• - 199,9 ... + 850,0 °C (= -328 ... +1563 °F)

• Rated impulse voltage(V)
• 4000

• Rated insulation voltage Ui(V)
• 250

• Resolution
• ≤0,6 mA
• -1999 / +9999

• Sensor
• Pt 100, 2- or 3-wire
• Pt 100, Pt 1000, KTY 83, KTY 84, 2- or 3-wire connection, line-resistance max. 3x 50 Ω

• Sensor current
• ≤ 0,5% vom Endwert

• Temperature factor
• <0,04 °C / K
• ± 0,02 % / Kelvin

• Temperature-measuring
• -199,9 ... + 850,0 °C (= -328 ... +1563 °F)

• Thermocouples
• B, E, J, K, L, N, R, S, T

• Voltage output
• DC 0/2 – 10 V

• Frequency Range(Hz)
• 48-62

• IP
• 66

• Output Voltage
• DC 0/2-10 V, load min. 1 kΩ

• Output Type
• PNP transistor open collector30V DC, 100mA (maximum)

• Detect
• Opaque ObjectsØ 0.20" 5mm Minimum

• Detection
• Through-beam

• Dielectric Strength
• Between live and dead parts: 1,000V AC, 50/60Hz, 1 minute

• LED
• On: When output is on

• Light Source
• Infrared LED (modulation mode)

• Material
• Housing and lens: polycarbonate

• Operating Humidity
• 35to 85% RH (avoid condensation)

• Operating Temperature (°C)
• -15~ 55 (avoid freezing)

• Style
• Broad Style