Rechercher
Français

Current-Sensor Type S1

Fabricant:

Ziehl

Numéro de pièce du fabricant:

S225694
Délai de livraison: 2 Weeks

Current sensor for AC- and DC currents, Put-on sensor with transistor output

102 CAD
+ -
Spécifications des produits
Brand ZIEHL
Country of origin Germany
Rated supply voltage DC 24V
Frequency Range(Hz) 10 ... 400
current consumption max. 12 mA + max. 20 mA per output
Output current ≤ 20 mA
Overload capacity 500 A
Rated impulse voltage(V) 4000
Rated insulation voltage Ui(V) 300
Protection housing IP 64
Applied standards UL/CSA

Recording of welding currents (mounting at ground wire) for controlling dedusting plants in combination with ZIEHL-controls type STW. Recording the state of a consumer of electricity (on or off or defective).

In general the current-sensor S1 is used where the current-flow is to be detected, with the exact value of the current either known from the power consumption of the connected consumer or does not matter for the evaluation.

For evaluation of measuring data in more than 1 cable, these outputs of several current-sensors can be connected in parallel (OR-evaluation).

  • switching point app. 5 A (option: adjustable 5-30 A)
  • monitoring of AC and DC currents
  • LED for current flow
  • mounting without disconnection of cable possible
  • 2 transistor-outputs, switching + and -, direct connection to a PLC possible
  • connection to current-relays ZIEHL type STW
  • robust, sealed execution
  • overload capacity: unlimited
Entrez votre propre avis fermer
  • Un produit ne peut être commenté qu'après avoir été acheté
  • Seuls les utilisateurs enregistrés peuvent saisir des avis
  • Mauvais
  • Excellent
Description

Recording of welding currents (mounting at ground wire) for controlling dedusting plants in combination with ZIEHL-controls type STW. Recording the state of a consumer of electricity (on or off or defective).

In general the current-sensor S1 is used where the current-flow is to be detected, with the exact value of the current either known from the power consumption of the connected consumer or does not matter for the evaluation.

For evaluation of measuring data in more than 1 cable, these outputs of several current-sensors can be connected in parallel (OR-evaluation).

  • switching point app. 5 A (option: adjustable 5-30 A)
  • monitoring of AC and DC currents
  • LED for current flow
  • mounting without disconnection of cable possible
  • 2 transistor-outputs, switching + and -, direct connection to a PLC possible
  • connection to current-relays ZIEHL type STW
  • robust, sealed execution
  • overload capacity: unlimited
Spécifications des produits
Brand ZIEHL
Country of origin Germany
Rated supply voltage DC 24V
Frequency Range(Hz) 10 ... 400
current consumption max. 12 mA + max. 20 mA per output
Output current ≤ 20 mA
Overload capacity 500 A
Rated impulse voltage(V) 4000
Rated insulation voltage Ui(V) 300
Protection housing IP 64
Applied standards UL/CSA
Tags des produits